Type I - General Purpose Thinner

Our all purpose Thinner I is exceedingly useful for cleaning application equipment and metal surfaces prior to applying Nycote ^® .

Store at 70°F to 120°F (21°C to 48°C)

>>Refer to SDS for additional safety information

Type II - Spray Thinner

Thinner II is specifically designed to reduce cobwebbing when spraying Nycote ^® 7-11 and Nycote ^® 88. Nycote ^® Laboratories suggests mixing Thinner II with our products at a 25% to 50% ratio for spraying.

Application of Thinner II

• Carefully clean surface with Nyclean ™ prior to Nycote ^® spraying application
• Use latex or neoprene gloves when mixing Thinner II with Nycote ^®
• Verify from the spray equipment manufacturer the correct solution mixture
• In a separate container mix Thinner II with the Nycote ^® product being sprayed
• Use low air pressure 10-20 p.s.i.
• Spray the mixed solution to the equipment/surface needing to be protected
  

Safety / Caution for Thinner I and Thinner II

• Keep Thinner II away from flames as vapors could be ignited
• If flames occur, use water to cool exposed containers along with self contained breathing apparatus and protective clothing
• May cause dizziness if used in confined area
• Moderate exposure may result in sensitization of skin, giddiness and headache
• Unconsciousness or death may occur in extreme cases
• If skin is exposed flush with water
  
• If swallowed, take two glasses of water but do not induce vomiting
• If it gets in eyes, flush with water for 15 minutes
• If spilled clean with rags and/or absorbent material

>>Refer to SDS for additional safety information

Nycote ^® Laboratories operates an ISO 9001:2015 and AS9100D Certified Quality Management System